Digital Planimeter

Next > >

Digital Planimeter

<< Previous

Send Inquiry

Product Code : 03

Product Description

Digital Planimeter

Special Features of PLACOM N-Series

Measurement by 6-digit pulse count

This N-Series measures the area by pulse count of 6-digit. This method enables a larger cumulative measurement of area (up to 10m²).

Maximum Cumulative Measurement Value of 10m².

With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary planimeter.
The conventional planimeter has a maximum cumulative area to measure only 0.1 m². So, in measurement, at every measurement value of 0.1m², the display is to be reset to 0. This reqires to register the numbers of how many times these resetting are occurred.
With the New PLACOM N-Series, there is no need of these troublesome procedures.

Function of Easy Conversion of the Value of Unit and Scale.

IP-900N and KP-800N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value.
KP-92N and KP-80N can convert the unit between in² and cm².

Hold Memory Function

In Cumulative Measurement, this Hold Memory function is effectively used.
If an error occurs in measuring No. "N" th area, press C/AC key. Then the pulse count value measured up to "N-1" th appears. No need of another measurements from the lst area to "N-1"th area again.